Description Heavy Duty Degreaser: Evolving Elements Heavy Duty Degreaser is a high-performance industrial cleaner designed to remove heavy grease, carbon, oils, and built-up grime from hard surfaces. Built with a blend of alkaline builders, safe solvent agents, and biodegradable surfactants, this formula delivers maximum degreasing power without the need for Dangerous Goods classification. Ideal for professional cleaning applications across commercial, automotive, manufacturing, and food-grade environments. Key Features & Benefits High-strength degreasing action with advanced alkaline cleaning agents Contains biodegradable surfactants and safe solvent technology Built-in chelating and sequestering agents for hard water performance Rinses freely and leaves minimal residue Non-DG formula for safer transport and storage Application Instructions Dilute according to the level of soil to be removed. For heavy-duty degreasing, a 1:5 dilution is recommended. For general cleaning, dilute 1:10 to 1:20. Apply the diluted solution using a pressure sprayer, foamer, mop, or manual scrub brush. Allow 3–5 minutes of dwell time to break down grease and grime. Agitate using a brush or pad if necessary. For pressure cleaning, spray over the surface, let it dwell, then rinse thoroughly using high-pressure water. Avoid allowing the product to dry on the surface before rinsing. Surface Compatibility Safe on most hard, non-porous surfaces including: – Concrete – Painted metal – Engine blocks – Brick and masonry – Tiles – Commercial kitchen floors Always pre-test on painted, coated, or sensitive surfaces before full application. Rinsing & Residue After application, rinse all surfaces thoroughly with clean water. The product contains fast-rinsing surfactants and does not leave behind oily residues. Where food-contact surfaces are involved, follow up with potable water rinse. Technical Specifications Appearance: Colored to slightly hazy liquid pH (as supplied): 11.5 – 12.5 Specific Gravity: ~1.12 Total Active Ingredients: ~24.6% Foam Level: Moderate DG Classification: Non-Dangerous Goods Precautionary Statements: Wear protective gloves and eye protection. Wash hands thoroughly after handling. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. First Aid: Eyes: Rinse cautiously with water. Remove contact lenses if present. Continue rinsing. • Skin: Wash with soap and water. • Inhalation: Move to fresh air. • Ingestion: Rinse mouth. Do not induce vomiting. Seek medical advice immediately. Storage & Disposal: Store in a cool, dry, well-ventilated area in sealed container. • Do not mix with acids or other chemicals. • Dispose of contents/container in accordance with local regulations. Important Notes: Do not apply and allow the product to dry on the surface. Avoid application in full sun, on hot surfaces, or in hot windy conditions. Ensure weather conditions are suitable; do not apply if the surface temperature is below 10°C and raining. Do not apply if the temperature exceeds 30°C.
